<?xml version="1.0" encoding="windows-1252"?><SEC xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://si.ksc.nasa.gov/sidownloads/xml/specsintactSEC.xsd"><MTA NAME="SUBFORMAT" CONTENT="NEW"/><MTA NAME="AUTONUMBER" CONTENT="TRUE"/><HDR><AST/><TAB BORDERS="0">
<WBK>
   <STS>
      <STY SID="s50">
         <ALN VERTICAL="BOTTOM"/>
      </STY>
   </STS>
   <TDA COLUMNCOUNT="2" ROWCOUNT="4">
      <COL STYLEID="s50" AUTOWIDTH="0" WIDTH="224.25"/>
      <COL STYLEID="s50" AUTOWIDTH="0" WIDTH="225.75"/>
      <ROW AUTOHEIGHT="0" HEIGHT="12.00">
         <CEL STYLEID="s50">
<DTA TYPE="STRING">USACE / NAVFAC / AFCEC</DTA>
         </CEL>
         <CEL STYLEID="s50">
<DTA TYPE="STRING">[UFGS-]<HLS>[00 00 00.00 00]</HLS> (<HLS>[mmmm yyyy]</HLS>)</DTA>
         </CEL>
      </ROW>
      <ROW AUTOHEIGHT="0" HEIGHT="12.00">
         <CEL MERGEDOWN="1" STYLEID="s50"/>
         <CEL STYLEID="s50">
<DTA TYPE="STRING">[Change <HLS>[#]</HLS> - <HLS>[mm/yy]</HLS>]</DTA>
         </CEL>
      </ROW>
      <ROW AUTOHEIGHT="0" HEIGHT="12.00">
         <CEL INDEX="2" STYLEID="s50">
<DTA TYPE="STRING"><HL3>------------------------------------</HL3></DTA>
         </CEL>
      </ROW>
      <ROW AUTOHEIGHT="0" HEIGHT="59.25">
         <CEL STYLEID="s50">
<DTA TYPE="STRING">Preparing Activity:  <PRA>[_____]</PRA></DTA>
         </CEL>
         <CEL STYLEID="s50">
<DTA TYPE="STRING">[Superseding<BRK/>[UFGS-]<HLS>[00 00 00.00 00]</HLS> (<HLS>[mmmm yyyy]</HLS>)]<BRK/></DTA>
         </CEL>
      </ROW>
   </TDA>
</WBK>
<BRL/><BRL/><BRL/><BRL/><BRL/><BRL/><BRL/><BRL/><BRL/></TAB><BRK/>
<HL4>UNIFIED FACILITIES GUIDE SPECIFICATIONS</HL4><BRK/>
<BRK/>
<HL4>[References are in agreement with UMRL dated <HLS>[mmmm yyyy]</HLS>]</HL4><BRK/>
<AST/><BRK/></HDR>
<BRK/>
<SCN>SECTION [00 00 00.00 00]</SCN><BRK/>
<BRK/>
<STL>[SECTION TITLE - MAXIMUM 64 CHARACTERS]</STL><BRK/>
<DTE>MM/YY</DTE><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  THIS AND OTHER TEMPLATE INSTRUCTIONS PERTAIN TO THE USE 
OF THIS TEMPLATE.  DO NOT INCLUDE THESE IN A SPECIFICATION.  Deselect the Template_Instr 
tailoring option tag before releasing the Master or publishing the Job.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>This template is for use as an aid in the development of a new UFGS master section 
and reflects paragraph titles and sequence detailed in the <URL HREF="https://www.wbdg.org/dod/ufc/ufc-1-300-02">UFS 1-300-02</URL> Unified 
Facilities Guide Specifications (UFGS) Format Standard.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>It is important that UFGS authors understand that the paragraphs listed below 
are not mandatory.  Use only those paragraphs that are applicable to the specified 
subject, and add any applicable requirements not listed.  It is important to 
follow the sequence of information provided herein even when adjusting the paragraph 
titles to fit the specified subject matter.  This template does not contain 
all of the paragraphs listed in the CSI SectionFormat.  Refer to CSI SectionFormat 
for further guidance on paragraph structure.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Highlighted (HLS) text within the section banner indicates variables.  Remove 
highlighting by deleting the tags.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>There are three standard notes used in UFGS:  1.  The GENERAL Note following 
this note; 2.  The note following the title of the REFERENCES paragraph;  and 
3.  The note following the title of the SUBMITTALS paragraph.  When notes to 
the designer are necessary, they are placed between the title and the text.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>There are two standard text paragraphs used in UFGS:  1.  The text in the REFERENCES 
paragraph preceeding the listing of references; and 2.  The text in the SUBMITTALS 
paragraph preceeding the listing of submittals required.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Text in paragraphs other than the standard notes and standard text are for information 
for the template user.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>In guide specifications, provide units of measure in both Metric and English 
Systems.  Using SpecsIntact tagging, enter the Metric measurement followed by 
the English measurement.  Example, "For sizes<MET> 40 mm</MET><ENG> 1-1/2 inches</ENG> and smaller..."</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Paragraph and subparagraph numbering to the sixth level must have titles and 
be completely numeric.  Below the paragraph or subparagraph level, titles are 
optional and list and item tags may be used with alternating alpha-numeric designation.  
This format will not translate to the Alphanumeric format and will not automatically 
renumber.  Manual numbering is required.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Refer to the SpecsIntact Help for instructions on how to tag paragraphs using 
the SpecsIntact software.  In order to maintain the proper tagging structure, 
it is suggested that this template be used with the tags turned on, then replace 
the template text with text of the new section.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><NTE><BRK/>
<AST/> <BRK/>
<NPR>Adhere to <URL HREF="https://www.wbdg.org/dod/ufc/ufc-1-300-02">UFS 1-300-02</URL> Specifications (UFGS) Format Standard when editing this guide specification 
or preparing new project specification sections.  Edit this guide specification 
for project specific requirements by adding, deleting, or revising text.  For 
bracketed items, choose applicable item(s) or insert appropriate information.</NPR><BRK/>
<BRK/>
<NPR>Remove information and requirements not required in respective project, whether 
or not brackets are present.</NPR><BRK/>
<BRK/>
<NPR>Comments, suggestions and recommended changes for this guide specification are 
welcome and should be submitted as a <URL HREF="https://www.wbdg.org/dod/ufgs">Criteria Change Request (CCR)</URL>.</NPR><BRK/>
<AST/><BRK/></NTE>
<BRK/>
<PRT><TTL>PART 1   GENERAL</TTL><BRK/>
<BRK/>
<SPT><TTL>UNIT PRICES</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies measurement and payment requirements 
for work subject to extreme variation in estimated quantity when unit price 
bidding is required.  Do not use this paragraph for guide specifications covering 
building components or for other construction features when quantities can be 
reasonably calculated from information included in the Contract.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>REFERENCES</TTL><BRK/>
<NTE><BRK/>
<AST/><BRK/>
<NPR>NOTE:  This paragraph is used to list the publications cited in the text of 
the guide specification.  The publications are referred to in the text by basic 
designation only and listed in this paragraph by organization, designation, 
date, and title.</NPR><BRK/>
<BRK/>
<NPR>Use the Reference Wizard's Check Reference feature when you add a Reference 
Identifier (RID) outside of the Section's Reference Article to automatically 
place the reference in the Reference Article.  Also use the Reference Wizard's 
Check Reference feature to update the issue dates.</NPR><BRK/>
<BRK/>
<NPR>References not used in the text will automatically be deleted from this section 
of the project specification when you choose to reconcile references in the 
Print/Publish process.</NPR><BRK/>
<AST/><BRK/></NTE>
<BRK/>
<TXT>The publications listed below form a part of this specification to the extent referenced.  The publications are 
referred to within the text by the basic designation only.</TXT><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Delete the following reference example.  Use the Reference 
Wizard to insert the appropriate References required for this section.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<REF><ORG>NAME (ACRONYM)</ORG><BRK/>
<BRK/>
<RID>REFERENCE IDENTIFIER</RID><RTL>(Date) Title</RTL><BRK/>
<BRK/></REF>
</SPT><SPT><TTL>DEFINITIONS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph is used only to define terms used in the 
specification section that are not defined by a commercial or Government standard 
and to provide a common interpretation of a term for contractual purposes.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>ADMINISTRATIVE REQUIREMENTS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Use this paragraph categorizes the requirements as related 
to the specific section when more than one of the subordinate titles is required.  
Omit this when only one of the subordinate titles is required and use the subordinate 
title as a primary paragraph title.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<SPT><TTL>Pre-Installation Meetings</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies requirements for meetings to 
coordinate the work or to sequence related work for sensitive and complex items 
in this paragraph.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Sequencing</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies requirements for coordinating 
work done in sequence with, or at the same time as, work in another section.  
Specify the particular sequence of events here.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Scheduling</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies requirements for coordinating 
work that requires unusual scheduling with work in other sections.  Specify 
the particular schedule of events here.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>SUBMITTALS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION: The Submittal Article must be in PART 1 and entitled 1.x 
SUBMITTALS (with x representing any number).</ITA></NPR> <BRK/>
<BRK/>
<NPR><ITA>Limit Submittals to those necessary for adequate quality control.  Organize 
submittal requirements using the following eleven submittal descriptions found 
in UFGS 01 33 00 SUBMITTAL PROCEDURES.  The submittal description (SD) numbers 
and names, assigned by the SpecsIntact Configuration, Control and Coordinating 
Board, relate to the terminology of the technical sections and should not be 
changed:</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>   SD-01 Preconstruction Submittals<BRK/>
   SD-02 Shop Drawings <BRK/>
   SD-03 Product Data <BRK/>
   SD-04 Samples <BRK/>
   SD-05 Design Data <BRK/>
   SD-06 Test Reports <BRK/>
   SD-07 Certificates <BRK/>
   SD-08 Manufacturer's Instructions <BRK/>
   SD-09 Manufacturer's Field Reports <BRK/>
   SD-10 Operation and Maintenance Data <BRK/>
   SD-11 Closeout Submittals </ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Submittal Items are inserted below the Submittal Descriptions (SD numbers and 
names).  Submittal Items are double-spaced and not case sensitive.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>When an item is tagged in the Submittal Article, it must also be tagged within 
the technical section in only one principal subpart that describe the requirements 
for the item; do not describe the requirements in this Article.  It can appear 
either as an Article, Paragraph, Subparagraph, or within the text.  If this 
is not done, the paragraph number for that item will not print on the Submittal 
Register.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Submittal classifications are only referenced in the Submittal Article.  Insert 
the Submittal classification G when Government approval is required due to the 
complexity or criticality of a Submittal Item.  <TAI OPT="ARMY">Refer to ER 415-1-10 for guidance 
on submittals requiring Government approval.  </TAI>When a Submittal Item is not designated 
by a G, it is for information only.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>The Reviewer is only referenced in the Submittal Article.  Following the classification 
G (for Government approval) and a separator using one of the following:  one 
space, a comma, a pipe symbol (|) or a dash (-), a Reviewer can be designated 
by inserting up to five characters (such as AE for Architect Engineer).</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><NTE><BRK/>
<AST/><BRK/>
<NPR>NOTE:  Review Submittal Description (SD) definitions in Section <SRF>01 33 00</SRF> SUBMITTAL 
PROCEDURES and edit the following list, and corresponding submittal items in 
the text, to reflect only the Submittals required for the project.  The Guide 
Specification technical editors have classified those items that require Government 
approval, due to their complexity or criticality, with a "G."  Generally, other 
submittal items can be reviewed by the Contractor's Quality Control System.  
Only add a "G" to an item if the submittal is sufficiently important or complex 
in context of the project.</NPR><BRK/>
<BRK/>
<NPR><TAI OPT="ARMY">For Army projects, fill in the empty brackets following the "G" classification 
with a code of up to three characters to indicate the approving authority.  
Codes for Army projects using the Resident Management System (RMS) are:  "AE" 
for Architect Engineer; "DO" for District Office (Engineering Division or other 
organization in the District Office); "AO" for Area Office; "RO" for Resident 
Office; and "PO" for Project Office.  </TAI>Codes following the "G" are not used for 
Navy and Air Force projects.</NPR><BRK/>
<BRK/>
<NPR>The "S" classification indicates submittals required as proof of compliance 
for sustainability Guiding Principles Validation or Third Party Certification 
and as described in Section <SRF>01 33 00</SRF> SUBMITTAL PROCEDURES.</NPR><BRK/>
<AST/><BRK/></NTE>
<BRK/>
<TXT>Government approval is required for submittals with a "G" or "S" classification.  Submittals not having a "G" 
or "S" classification are<TAI OPT="AIR FORCE,NAVY"> for Contractor Quality Control approval.</TAI><TAI OPT="ARMY"> for information only.  When used, a code following 
the "G" classification identifies the office that will review the submittal for the Government.</TAI>  Submit the following 
in accordance with Section <SRF>01 33 00</SRF> SUBMITTAL PROCEDURES:</TXT><BRK/>
<BRK/>
[<LST><SUB>SD-01 Preconstruction Submittals</SUB></LST><BRK/>
<TAI OPT="DESIGN-BUILD"><TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Submittals which are required prior to start of construction 
(work).</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI></TAI><TAI OPT="NAVY"><TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Submittals which are required prior to or commencing 
work on site.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI></TAI><TAI OPT="ARMY"><TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Submittals which are required prior to or the start of 
the next major phase of the construction on a multi-phase contract, includes 
schedules, tabular list of data, or tabular list including location, features, 
or other pertinent information regarding products, materials, equipment, or 
components to be used in the work.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI></TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-02 Shop Drawings</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Drawings, diagrams and schedules specifically prepared 
to illustrate some portion of the work.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Diagrams and instructions from a manufacturer or fabricator for use in producing 
the product and as aids to the Contractor for integrating the product or system 
into the project.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Drawings prepared by or for the Contractor to show how multiple systems and 
interdisciplinary work will be coordinated.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-03 Product Data</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Catalog cuts, illustrations, schedules, diagrams, performance 
charts, instructions, and brochures illustrating size, physical appearance, 
and other characteristics of materials or equipment for some portion of the 
work.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Samples of warranty language when the contract requires extended product warranties.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-04 Samples</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Fabricated or unfabricated physical examples of materials, 
equipment or workmanship that illustrate functional and aesthetic characteristics 
of a material or product and establish standards by which the work can be judged.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Color samples from the manufacturer's standard line (or custom color samples 
if specified) to be used in selecting or approving colors for the project.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Field samples and mock-ups constructed on the project site establish standards 
by which the ensuring work can be judged.  Includes assemblies or portions of 
assemblies which are to be incorporated into the project and those which will 
be removed at conclusion of the work.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-05 Design Data</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Design calculations, mix designs, analyses, or other 
data pertaining to a part of work.</ITA></NPR><BRK/>
<TAI OPT="DESIGN-BUILD"><BRK/>
<NPR><ITA>Design submittals, design substantiation submittals, and extensions of design 
submittals</ITA></NPR>.<BRK/></TAI>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-06 Test Reports</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Report signed by authorized official of testing laboratory 
that a material, product or system identical to the material, product, or system 
to be provided has been tested in accordance with specified requirements.  (Testing 
must have been within 3 years of date of contract award for the project.)</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Report which includes findings of a test required to be performed by the Contractor 
on an actual portion of the work or prototype prepared for the project before 
shipment to job site.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Report which includes findings of a test made at the job site or on sample taken 
from the job site, on portion of work during or after installation.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-07 Certificates</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Statements printed on the manufacturer's letterhead and 
signed by responsible officials of manufacturer of product, system, or material 
attesting that product, system, or material meets specification requirements.  
Must be dated after award of project contract and clearly name the project.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Document required of Contractor, or of a manufacturer, supplier, installer, 
or Subcontractor through Contractor, the purpose of which is to further quality 
of orderly progression of a portion of the work by documenting procedures, acceptability 
of methods, or personnel qualifications.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-08 Manufacturer's Instructions</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Preprinted material describing installation of a product, 
system, or material, including special notices and Material Safety Data Sheet 
(MSDS)concerning impedances, hazards, and safety precautions.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-09 Manufacturer's Field Reports</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Documentation of the testing and verification actions 
taken by the manufacturer's representative at the job site, in the vicinity 
of the job site, or on a sample taken from the job site, on a portion of the 
work, during or after installation, to confirm compliance with manufacturer's 
standards or instructions.  The documentation must be signed by an authorized 
official of a testing laboratory or agency and must state the test results, 
and indicate whether the material, product, or system has passed or failed the 
test.</ITA></NPR><ITA><BRK/>
<AST/></ITA><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-10 Operation and Maintenance Data</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Data that is furnished by the manufacturer, or the system 
provider, to the equipment operating and maintenance personnel, including manufacturer's 
help and product line documentation necessary to maintain and install equipment.  
This data is needed by operating and maintenance personnel for the safe and 
efficient operation, maintenance, and repair of the item.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>This data is intended to be incorporated in an operations and maintenance manual 
or control system.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
][<LST><SUB>SD-11 Closeout Submittals</SUB></LST><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  Documentation to record compliance with technical or 
administrative requirements or to establish an administrative mechanism.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Special requirements necessary to properly close out a construction contract.  
For example, Record Drawings and as-built drawings.  Also, submittal requirements 
necessary to properly close out a major phase of construction on a multi-phase 
contract</ITA>.</NPR><BRK/>
<BRK/>
<NPR><ITA>Interim "DD Form 1354" with cost breakout for all assets 30 days prior to facility 
turnover.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<ITM><SUB>[Enter Submittal Item in Initial Caps]</SUB>; <SUB>G<TAI OPT="ARMY">, [_____]</TAI></SUB></ITM><BRK/>
<BRK/>
]</SPT><SPT><TTL>MAINTENANCE MATERIAL SUBMITTALS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph categorizes maintenance materials requiring 
no action other than confirmation of receipt under an explanatory heading.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Spare Parts</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies extra stock materials and items 
provided for Government use in facility operation, maintenance, and repair.  
Identify the type and quantity here, but include the actual characteristics 
of the materials in PART 2.  Include items that might be difficult to obtain 
because of color or pattern match, or spare parts needed to ensure continued 
operation of critical equipment.  Identify the items, state the quantities required, 
and indicate delivery to whom, when, and where.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>QUALITY CONTROL</TTL><BRK/>
<BRK/>
<SPT><TTL>Regulatory Requirements</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes obligations for compliance with 
specific code requirements for Contractor-designed items such as wood trusses, 
labeling such as Underwriters Laboratory, Inc., and requirements of public authorities 
such as state highway departments.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Qualifications</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes statements of qualifications 
(licenses) for Contractor designers, manufacturers, fabricators, welders, installers, 
and applicators of products and completed work.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>DELIVERY, STORAGE, AND HANDLING</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes the necessary requirements on 
packing and shipping, acceptance at site, and storage and protection.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>PROJECT/SITE CONDITIONS</TTL><BRK/>
<BRK/>
<SPT><TTL>Environmental Requirements</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph establishes any physical or environmental 
limitations or criteria.  Such conditions might include temperature, weather, 
humidity, ventilation, and illumination required for proper installation or 
application.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Existing Conditions</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes statements or references to documents 
where information may be found pertaining to such items as existing structures 
or geophysical reports.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>WARRANTY</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph describes special or extended (more than 
one year) warranty or bond covering the conformance and performance of the work 
of the section.  A thorough understanding of warranties is necessary to develop 
this paragraph.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
]</PRT><PRT><TTL>PART 2   PRODUCTS</TTL><BRK/>
<BRK/>
<SPT><TTL>SYSTEM DESCRIPTION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph describes performance or design requirements 
and tolerances of a complete system in this paragraph.  Limit descriptions to 
composite and operational properties to the extent necessary to link multiple 
components of a system together, and to interface with other systems.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Design Requirements</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes design requirements, such as 
criteria for structural, thermal, acoustical, or other properties.  State required 
tolerances here only as they apply to the performance of the complete system.  
Include tolerances of fabrication and installation in their respective paragraphs 
under PART 1.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Performance Requirements</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes performance requirements, such 
as criteria for structural, thermal, acoustical, or other properties.  State 
required tolerances here only as they apply to the performance of the complete 
system.  Include tolerances of fabrication and installation in their respective 
paragraphs under PART 2.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>[ASSEMBLY][FABRICATION]</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph describes items that must be shop manufactured, 
fabricated, or assembled before delivery to the site.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Factory Assembly</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph states factory assembly as a result.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Shop Fabrication</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph states shop fabrication as a result, but 
may include statements of required methods, trial, or permanent assembly of 
equipment and components away from the construction site.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Tolerances</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies allowable variations from specified 
requirements.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Finishes</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies shop or factory finishing requirements.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>MANUFACTURED UNITS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides statements describing a complete 
manufactured unit, usually a standard catalog item.  Statements may include 
descriptive requirements for the materials, specific fabrication, finishes, 
and function.  Use separate paragraphs for each different item when appropriate.  
The name used for the manufactured unit must be consistent throughout the guide 
specification.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>EQUIPMENT</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides statements describing the function, 
operation, and other specific requirements of equipment installed in the work.  
Use separate paragraphs for each different item when appropriate.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>COMPONENTS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides statements describing the specific 
components of a system, manufactured unit, or type of equipment  installed in 
the work.  Use separate paragraphs for each different item when appropriate.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>MATERIALS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph identifies the material, system, assembly, 
or product furnished.  Independently incorporate Materials specified here into 
the work under PART 3 EXECUTION.  Consistently use the name for the material 
throughout the guide specification.  Omit this paragraph when the materials 
can be included with the description of a particular manufactured unit, equipment, 
component, or accessory.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>MIXES</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides proportions and procedures for 
mixing materials.  Mixing is the preparation of materials for use and is considered 
to be part of the manufacturing process even when this work is done onsite.  
This paragraph is required for products such as asphalt concrete, portland cement, 
concrete, mortar, and plaster.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>ACCESSORIES</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides requirements for subordinate 
or secondary items that aid and assist primary products specified above or are 
necessary for preparation or installation of those items.  This paragraph should 
not include basic options available for manufactured units and equipment.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>TESTS, INSPECTIONS, AND VERIFICATIONS</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies tests, inspections, or verifications 
of products required at the source, i.e., plant, mill, factory, or shop.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</PRT><PRT><TTL>PART 3   EXECUTION</TTL><BRK/>
<BRK/>
<SPT><TTL>EXAMINATION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies the act of physically determining 
that conditions are acceptable to receive the primary products of the section.  
Specify requirements for verifying suitability of conditions for installation.  
Specify requirements for verifying the absence of defects or errors that would 
cause defective installation or application of products, or cause latent defects 
in workmanship and function.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>PREPARATION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers actions required to physically 
prepare the surface, area, or site to incorporate the primary products of the 
section.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Protection</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph specifies requirements for protecting 
the surrounding areas and surfaces.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Surface Preparation</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph describes preparatory work required prior 
to installation, application, or erection of primary products.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>ERECTION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers actions required to accomplish 
a specified unit of work in the section, and may include requirements necessary 
for installation of products furnished under other sections.  If products are 
to be installed according to manufacturer's instructions, then the manufacturer's 
instructions should be a required submittal as evidence of those requirements.  
Separate paragraphs for each different item, as appropriate, may be used.  The 
names of the products or the type of work may be incorporated into the paragraph 
titles, in which case, the wording should reflect the generic product or terminology 
used throughout the Contract documents.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>INSTALLATION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph may be used when more appropriate than 
paragraph ERECTION.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>APPLICATION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph may be used when more appropriate than 
paragraph ERECTION.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Special Techniques</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph describes special procedures for incorporating 
products.  These procedures may include spacings, patterns, or unique treatments.  
The wording of the paragraph title should reflect the subject matter.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Interface with Other Products</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides descriptions specific to compatibility 
and transition to other materials.  This may include incorporating accessories, 
anchorage, and any special separation or bonding.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Tolerances</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers allowable variations in application 
thickness or from indicated locations.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>FIELD QUALITY CONTROL</TTL><BRK/>
<BRK/>
<SPT><TTL>Tests</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph defines the tests required for installed 
or completed work.  These tests are different and separate from those required 
for materials and products prior to installation or application.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Inspection</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph defines the inspections required for installed 
or completed work.  These inspections are different and separate from those 
required for materials and products prior to installation or application.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Manufacturer Field Service</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers specific requirements when manufacturers 
are to provide field quality control with onsite personnel for instruction or 
supervision of the installation or application of their products, or for startup 
or demonstration.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>SYSTEM STARTUP</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph lists actions applicable to the startup 
of operational systems and equipment.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Use the Ordered List OLG/OLI example below for applicable lists.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<OLG><BRK/>
<OLI>[Item]</OLI><BRK/>
<BRK/>
<OLI>[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="2">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="2">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="3">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="3">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="4">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="4">[Item]</OLI><BRK/></OLG>
<BRK/></SPT>
<SPT><TTL>ADJUSTING AND CLEANING</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph provides final actions to prepare installed 
equipment or other completed work to properly function or perform.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>CLOSEOUT ACTIVITIES</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers requirements for demonstrating, 
instructing, and training owner's personnel on sequence of operations, general 
facility operation, and facility maintenance procedures.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<SPT><TTL>Demonstration</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers requirements of the installer or 
manufacturer to demonstrate the proper operation of equipment.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>Training</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers requirements of the installer or 
manufacturer to train the owner's personnel in the operation and maintenance 
of equipment for ongoing facility management and maintenance.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>PROTECTION</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes provisions for protecting installed 
work prior to acceptance of the project.  Protection of surrounding areas and 
surfaces during application or installation is included in paragraph PREPARATION.  
Include only statements unique to this section.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
<SPT><TTL>MAINTENANCE</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers provisions for maintenance as applicable 
to critical systems, equipment, and Storm Water Pollution Protection Plan (SWPPP) 
landscaping.  Service agreements, if not paid in advance, should be separate 
from the construction agreement to avoid delaying the final payment and holding 
the contract open for extended periods.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/>
<SPT><TTL>Extra Materials</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph lists items to be furnished to the Government 
by the Contractor for future maintenance and repair.  Include items that might 
be difficult to obtain because of color or pattern match, or spare parts needed 
to ensure continued operation of critical equipment.  Specifications should 
identify the items, state the quantities required, and indicate to whom, when, 
and where items are to be delivered.</ITA></NPR><BRK/>
<BRK/>
<NPR><ITA>Use the Ordered List OLG/OLI example below for applicable lists.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<OLG><BRK/>
<OLI>[Item]</OLI><BRK/>
<BRK/>
<OLI>[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="2">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="2">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="3">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="3">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="4">[Item]</OLI><BRK/>
<BRK/>
<OLI LEVEL="4">[Item]</OLI><BRK/></OLG>
<BRK/></SPT>
<SPT><TTL>Maintenance Service</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph covers provisions for maintenance service 
as applicable to critical systems, equipment, and landscaping.  Service agreements, 
if not paid in advance, should be separate from the construction agreement to 
avoid delay of the final payment and holding the contract open for extended 
periods.</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</SPT><SPT><TTL>SCHEDULES</TTL><BRK/>
<TAI OPT="TEMPLATE_INSTR"><NTE><BRK/>
<AST/><BRK/>
<NPR><ITA>TEMPLATE INSTRUCTION:  This paragraph includes schedules that indicate where 
to put what or provides other coordinating data.  Schedules are sometimes placed 
here in the specification section rather than on the drawings.  (Only the format 
for a schedule would normally be included in a UFGS.)</ITA></NPR><BRK/>
<AST/><BRK/></NTE>
</TAI><BRK/>
<TXT>Enter text here.</TXT><BRK/>
<BRK/></SPT>
</PRT>    <END/><BRK/></SEC>
